[plugins]
accelerometeradaptor = steaccelerometeradaptor
alsadaptor = alsadaptor-ascii
proximityadaptor = proximityadaptor-evdev
magnetometeradaptor = magnetometeradaptor-ncdk

[accelerometer]
ste_acc_sys_path = /sys/bus/i2c/drivers/lsm303dlh_a/2-0018/device0/accel_raw
path = /sys/bus/i2c/drivers/lsm303dlh_a/2-0018/device0/accel_raw
mode_path = /sys/bus/i2c/drivers/lsm303dlh_a/2-0018/device0/mode
frequency_mode = 4
range_path = /sys/bus/i2c/drivers/lsm303dlh_a/2-0018/device0/accel_range
range_mode = 1
dataranges = "-32767=>32767"
intervals = "50,100,400,1000"
transformation_matrix = "-1,0,0,0,-1,0,0,0,-1"

[magnetometer]
seek = 1
path = /sys/bus/i2c/drivers/lsm303dlh_m/2-001e/device1/data
path_power_state = /sys/bus/i2c/drivers/lsm303dlh_m/2-001e/device1/mode
path_sens_adjust = /sys/bus/i2c/drivers/lsm303dlh_m/2-001e/device1/config
dataranges = "-4096=>4096"
intervals = "25,50,100,200,250,500,1000"
default_interval = 1000
scale_coefficient = 300
calibration_rate = 100
calibration_timeout = 60000


[als]
driver_type = 3
mode = 3
seek = 1
path = /sys/bus/i2c/drivers/bh1780/2-0029/lux
powerstate_path = /sys/bus/i2c/drivers/bh1780/2-0029/power_state
dataranges = "0=>65535"
intervals = "50=>2000"
default_interval = 1000

[proximity]
input_match = gpio-keys
dataranges = "0=>4096"
device = /dev/input/event0

[global]
device_sys_path = /dev/input/event%1