# Configuration file for MCE - Example led patterns for hybris backend [LEDPatternHybris] # Patterns used for the hybris hardware; # Please prefix pattern names with Pattern to avoid name space clashes # # [0] Priority (0 - highest, 255 - lowest) # [1] ScreenOn - 0 only show pattern when the display is off # 1 show pattern even when the display is on # 2 only show pattern when the display is off, including acting dead # 3 show pattern even when the display is on, including acting dead # 4 only show pattern if the display is off, or if in acting dead # 5 always show pattern, even if LED disabled # [2] Timeout in seconds before pattern is disabled, 0 for infinite # [3] OnPeriod in milliseconds # [4] OffPeriod in milliseconds # [5] RGB24 as hexadecimal number PatternRed=31;3;0;200;1000;ff0000 PatternGreen=32;3;0;400;800;00ff00 PatternBlue=33;3;0;600;600;0000ff PatternMagenta=34;3;0;500;500;ff00ff PatternCyan=35;3;0;500;1000;00ffff PatternYellow=36;3;0;500;1500;ffff00 PatternWhite=37;3;0;500;4000;ffffff [LED] # A list of all pattern names that should be configured #LEDPatternsRequired=PatternBlack # A list of pattern names that should not be used even if configured #LEDPatternsDisabled=PatternWhite