# Configuration file for MCE - Normal led patterns for hybris backend [LEDPatternHybris] # Patterns used for the hybris hardware; # Please prefix pattern names with Pattern to avoid name space clashes # # [0] Priority (0 - highest, 255 - lowest) # [1] ScreenOn # 0 only show pattern when the display is off # 1 show pattern even when the display is on # 2 only show pattern when the display is off, including acting dead # 3 show pattern even when the display is on, including acting dead # 4 only show pattern if the display is off, or if in acting dead # 5 always show pattern, even if LED disabled # 6 Like 0, but automatically disable after display on # 7 show pattern even when the display is dim # [2] Timeout in seconds before pattern is disabled, 0 for infinite # [3] OnPeriod in milliseconds # [4] OffPeriod in milliseconds # [5] RGB24 as hexadecimal number # # Note: If blinking is enabled, only full intensity colors are applicable # i.e. red, green, yellow, blue, magenta, cyan or white should be used. PatternDeviceOn=254;0;0;0;0;0000ff # 0000ff = blue PatternDisplayDimmed=252;7;0;0;0;001f1f # 001f1f=low intensity cyan PatternPowerOn=10;3;0;0;0;bfbfbf #bfbfbf = grey75 PatternPowerOff=8;3;0;0;0;ff0000 # ff0000 = red PatternCommunication=30;6;0;500;1500;ff00ff # ff00ff = magenta PatternCommunicationCall=25;6;0;500;1500;00ff00 # 00ff00 = green PatternCommunicationIM=30;6;0;500;1500;0000ff # 0000ff = blue PatternCommunicationSMS=26;6;0;500;1500;0000ff # 0000ff = blue PatternCommunicationEmail=27;6;0;500;1500;ffff00 # ffff00 = yellow PatternCommonNotification=30;1;0;500;1500;00ffff # 00ffff = cyan PatternWebcamActive=20;1;0;0;0;7f0000 # 8b0000 ~ DarkRed PatternBatteryCharging=50;4;0;0;0;7f7f7f # 7f7f7f = gray50 PatternBatteryFull=40;4;0;500;2500;ffffff # ffffff = white PatternCommunicationAndBatteryFull=29;1;0;500;2500;ffffff # ffffff = white PatternBatteryChargingFlat=50;4;0;0;0;7fbfff # 87ceff ~ SkyBlue1 [LED] # A list of all pattern names that should be configured LEDPatternsRequired= # A list of pattern names that should not be used even if configured LEDPatternsDisabled=PatternDeviceOn