1. 17 May, 2019 1 commit
    • spiiroin's avatar
      [mce] Unify license blurbs. JB#33684 · 091d6e7e
      spiiroin authored
      MCE uses LGPL v2.1 (without "or later") license, but due to missing / use
      of different license blurbs this is not always clear enough.
      
      Replace blurbs referring to "LGPLv2" short form which could be either
      LGPL v2.0 or v2.1 without "or later" with the same blurb that is used
      in mce.c file.
      
      Similarly add blurb to source files that are missing one altogether.
      
      Add all authors that can be derived from git logs.
      
      Update Jolla Ltd. copyright statements to match git activity.
      Signed-off-by: spiiroin's avatarSimo Piiroinen <simo.piiroinen@jollamobile.com>
      091d6e7e
  2. 28 Feb, 2018 1 commit
    • spiiroin's avatar
      [datapipe] Unify naming. Contributes to JB#22475 · 5fadb870
      spiiroin authored
      Use "datapipe_"  prefix for all functions:
      
       datapipe_add_filter            <- append_filter_to_datapipe
       datapipe_add_input_trigger     <- append_input_trigger_to_datapipe
       datapipe_add_output_trigger    <- append_output_trigger_to_datapipe
       datapipe_exec_filters          <- execute_datapipe_filters
       datapipe_exec_full             <- execute_datapipe
       datapipe_exec_input_triggers   <- execute_datapipe_input_triggers
       datapipe_exec_output_triggers  <- execute_datapipe_output_triggers
       datapipe_free                  <- free_datapipe
       datapipe_init                  <- setup_datapipe
       datapipe_remove_filter         <- remove_filter_from_datapipe
       datapipe_remove_input_trigger  <- remove_input_trigger_from_datapipe
       datapipe_remove_output_trigger <- remove_output_trigger_from_datapipe
      
      Datapipes that are used for solely for requesting state changes (i.e. do not
      themselves have a state) have a verb in the name:
      
       display_state_request_pipe          <- display_state_req_pipe
       led_pattern_activate_pipe           (no change)
       led_pattern_deactivate_pipe         (no change)
       tklock_request_pipe                 <- tk_lock_pipe
      
      Datapipes that are used solely process input events without having a
      persistent state have "event" in the name:
      
       heartbeat_event_pipe                <- heartbeat_pipe
       ignore_incoming_call_event_pipe     <- ignore_incoming_call_pipe
       inactivity_event_pipe               <- device_inactive_event_pipe
       keypress_event_pipe                 <- keypress_pipe
       resume_detected_event_pipe          <- device_resumed_pipe
       touchscreen_event_pipe              <- touchscreen_pipe
       user_activity_event_pipe            <- user_activity_pipe
      
      Datapipes dealing with brightness have "brightness" included in the name:
      
       display_brightness_pipe             (no change)
       key_backlight_brightness_pipe       <- key_backlight_pipe
       led_brightness_pipe                 (no change)
       lpm_brightness_pipe                 (no change)
      
      Datapipes dealing with sensors have "sensor" in name and the one holding
      unfiltered data is called "actual":
      
       lid_sensor_actual_pipe              <- lid_cover_sensor_pipe
       lid_sensor_filtered_pipe            <- lid_cover_policy_pipe
       lid_sensor_is_working_pipe          (no change)
       light_sensor_actual_pipe            <- ambient_light_sensor_pipe
       light_sensor_filtered_pipe          <- ambient_light_level_pipe
       light_sensor_poll_request_pipe      <- ambient_light_poll_pipe
       orientation_sensor_actual_pipe      <- orientation_sensor_pipe
       proximity_sensor_actual_pipe        <- proximity_sensor_pipe
      
      Datapipes that have enumerated state reflect the enumeration type in
      datapipe name:
      
       alarm_ui_state_pipe                 (no change)
       audio_route_pipe                    (no change)
       battery_status_pipe                 (no change)
       bluez_service_state_pipe            <- bluez_available_pipe
       call_state_pipe                     (no change)
       call_type_pipe                      (no change)
       camera_button_state_pipe            <- camera_button_pipe
       charger_state_pipe                  (no change)
       compositor_service_state_pipe       <- compositor_available_pipe
       devicelock_service_state_pipe       <- devicelock_available_pipe
       devicelock_state_pipe               <- device_lock_state_pipe
       display_state_curr_pipe             <- display_state_pipe
       display_state_next_pipe             (no change)
       dsme_service_state_pipe             <- dsme_available_pipe
       jack_sense_state_pipe               <- jack_sense_pipe
       keyboard_available_state_pipe       <- keyboard_available_pipe
       keyboard_slide_state_pipe           <- keyboard_slide_pipe
       lens_cover_state_pipe               <- lens_cover_pipe
       lipstick_service_state_pipe         <- lipstick_available_pipe
       lockkey_state_pipe                  <- lockkey_pipe
       ngfd_service_state_pipe             <- ngfd_available_pipe
       submode_pipe                        (no change)
       system_state_pipe                   (no change)
       thermal_state_pipe                  (no change)
       uiexception_type_pipe               <- exception_state_pipe
       usb_cable_state_pipe                <- usb_cable_pipe
       usbmoded_service_state_pipe         <- usbmoded_available_pipe
      
      Datapipes that have boolean state should answer an
      "is" question:
      
       device_inactive_pipe                <- device_inactive_state_pipe
       interaction_expected_pipe           (no change)
       keypad_grab_active_pipe             (no change)
       keypad_grab_wanted_pipe             (no change)
       master_radio_enabled_pipe           <- master_radio_pipe
       music_playback_ongoing_pipe         <- music_playback_pipe
       osupdate_running_pipe               <- update_mode_pipe
       packagekit_locked_pipe              (no change)
       power_saving_mode_active_pipe       <- power_saving_mode_pipe
       proximity_blanked_pipe              <- proximity_blank_pipe
       shutting_down_pipe                  (no change)
       touch_detected_pipe                 (no change)
       touch_grab_active_pipe              (no change)
       touch_grab_wanted_pipe              (no change)
      
      Datapipes that have integer state should answer
      and "what is" question:
      
       battery_level_pipe                  (no change)
       inactivity_delay_pipe               <- inactivity_timeout_pipe
      
      Rename datapipe related callback functions and variables similarly as what
      was done to datapipes.
      
      Define submode bitmasks as submode_t enumeration instead of using
      gint type and preprocessor constants. Change the value naming from
      MCE_xxx_SUBMODE to MCE_SUBMODE_xxx.
      
      Change call_type_t enumeration value naming from xxx_CALL to
      CALL_TYPE_xxx.
      
      Change system_state_t enumeration value naming from MCE_STATE_xxx
      to MCE_SYSTEM_STATE_xxx.
      
      Fix setting up of power_saving_mode_active_pipe, master_radio_enabled_pipe
      and lens_cover_state_pipe so that initial values of appropriate type are
      used.
      
      Switch lockkey_state_pipe value from gboolean to key_state_t type.
      Signed-off-by: spiiroin's avatarSimo Piiroinen <simo.piiroinen@jollamobile.com>
      5fadb870
  3. 05 Sep, 2015 1 commit
  4. 14 Mar, 2015 1 commit
    • spiiroin's avatar
      Remove SoftOff mode · b6d161ea
      spiiroin authored
      SoftOff mode is basically manual suspend to RAM for pre N900 era maemo
      devices. The logic in MCE side does not work and also support needed by
      it has beed dropped from DSME side ages ago.
      
      Remove all remnants of SoftOff mode that still linger in mce code tree.
      
      [mce] Remove SoftOff mode. Fixes JB#27285
      b6d161ea
  5. 17 Jun, 2014 2 commits
    • spiiroin's avatar
      6217ae88
    • spiiroin's avatar
      Do not required dsme to be running when mce starts up · ecd3ebaf
      spiiroin authored
      Previously mce could not be started unless dsme was running and was
      forced to exit if dsme stopped/crashed.
      
      Now mce tracks availability of dsme by watching D-Bus name ownership
      changes of com.nokia.dsme on system bus and makes connection when
      dsme is up and running.
      
      While dsme is not available process watchdog ping-pong based heartbeat
      activities do not get triggered and shutdown requests can't be made.
      
      I/O errors during socket IPC with dsme trigger re-connect attempt.
      
      Also the mce --debug-mode command line option is removed since it is not
      needed anymore.
      
      [mce] Do not required dsme to be running when mce starts up. Fixes JB#11581
      ecd3ebaf
  6. 26 May, 2014 1 commit
  7. 22 Aug, 2013 1 commit
  8. 12 May, 2011 1 commit
  9. 28 Jan, 2011 1 commit
  10. 16 Dec, 2010 1 commit